Chilled Beam Accessories

Click on an accessory below to learn more

Damper, model CRPc

4, 5 and 6 in nominal diameter balancing and commissioning damper with perforated damper blade and manual adjusting knob.

SYST CRPc9-100, -125 or -160 commissioning damper

	CRPc 9	A	B	h	Weight
Size	Dim.	in	in	in	lbs
-100	3.94	8.3	4.3	0.8	1.54
-125	4.92	8.3	4.3	0.8	1.76
-160	6.3	8.3	4.3	0.8	1.9

Damper, model CRTc

Motorized driven circular commissioning damper with actuator as standard.

Connection piece, air-90 duct bend, model SYST CA

Used if the beam air connection will be connected on the long side or vertically.

Connection piece, air-90 duct bend

Available in three dimensions:

4″ air connection

5″ air connection

6″ air connection

NPT Push-on Fitting

Swegon chilled beams have 12 mm plain water connections. We offer NPT push on fitting with ½” NPT sleeve nut on the other end for North American building connections.

We offer Flexible hoses with 12 mm push on at the beam connections and available with quick-fit, push-on couplings, Male NPT as well as clamping ring couplings for quick and simply building connection. The hoses are also available in various lengths and end connectors, Note that clamping ring couplings require support sleeves inside the tubes.

F20 = Flexible hoses with quick-fit, push-on couplings at both ends

F30 = Flexible hose with quick-fit, push-on coupling at one end and a compression fitting at one end

F50 = Flexible hose with quick-fit, push-on coupling at one end and threaded nut at one end

Air, Push-on, model SYST AR-12

An air vent is available as a complement to the flexible hoses with push-on couplings. The air vent fits directly in the push-on hose coupling and can be installed in an instant.

Air vent, SYST AR-12

Condensation Sensor, Model WCD2

The sensor WCD2 is designed to meet the requirements to provide early warning of condensing conditions. The sensor operates proactively by detecting if there is a risk of condensation(dew) in the ambient climate before it occurs. In case of a problem with the system, the sensor is used as a safeguard to avoid condensation from occurring in chilled beam. The sensor operates on dew point temperature rather than a fixed value of relative humidity. The dew point is calculated from a temperature compensated RH element and a high accuracy thermistor which are thermally bonded to the metal plate of the sensor. The volt-free contact relay in the sensor is activated when the dew point temperature is below the calculated dew point temperature. The sensor should be mounted on entering the cooling water pipe and closed to the coil.

WCD 2 condensation sensor

CLA Silencer

A rectangular sound attenuator with circular connection spigots. Unique properties regarding installation height, fire-resistance class, fiber-migration proof design and sound attenuation. Patented of the self-supporting fiber-migration proof surface.

Connection piece, air-Insertion joint, Model SYST AD1

Model SYST AD1 is used as an insertion joint between the beam and the duct system. Available in three dimensions: 5” dia., 6” dia., and 8” dia.

Extract Air Register-Model EXCa

EXCa consists of three parts: the mounting frame, the outer and inner cones. The cones are made of sheet steel. The mounting frame is made of galvanized steel. The cones are painted.